Teachers keep finding Re:Form on their own: art departments, design and technology classes, a university course or two. This post is the page we wish they'd had when they did: what a 3D sculpting lesson in the browser looks like, what it needs, and the rules that matter for a class. Disclosure up front: we build Re:Form, so this is about our tool, and we've tried to be plain about its limits.

Can students sculpt in 3D without installing anything?

Yes. Re:Form runs entirely in a browser tab, so there is nothing for IT to install, update or approve on each machine. A student opens reformsculpt.com/app, signs in, and is sculpting a sphere within a minute. The Free plan is permanent, needs no card, and has the full toolset: every brush, layers, masking, symmetry, remeshing and painting, up to 12.5 million triangles.

What it needs is a browser with WebGPU: current Chrome or Edge on Windows, macOS and ChromeOS, Firefox on Windows, or Safari 26 on a Mac. If a machine can't run it, the studio says so straight away instead of failing halfway through a lesson.

Does it work on school Chromebooks?

On most Chromebooks from roughly 2021 onwards, yes. ChromeOS has had WebGPU since Chrome 113 on devices with Vulkan support, and Chromebooks update Chrome on their own. The quickest check, before you plan a lesson around it:

  1. On one student Chromebook, open chrome://gpu and look for WebGPU: Hardware accelerated.
  2. Open the app, sign in, and drag the Clay brush across the sphere for a minute. If the surface follows the pointer without lag, that model of Chromebook is fine.

School-managed devices add one more thing to check: the administrator's policies. Two come up most often:

  • Graphics policies. If chrome://gpu says WebGPU is disabled, a device policy may be the reason; our WebGPU troubleshooting guide covers the common causes.
  • Sign-in with school Google accounts. Some schools only allow approved apps to use "Continue with Google". If the button is refused, your IT admin can allow Re:Form, or students can sign up with an email address and password instead.

There's more detail on ChromeOS in our Chromebook sculpting guide.

Who can use it: the age rules

Re:Form's terms require users to be at least 13. Students under 18 may use it with the involvement of a parent or guardian who accepts the terms for them. So it fits secondary school, college and university classes; it is not for primary-age pupils, even under supervision. Each student needs their own account, and the Free plan covers personal, non-commercial work, which is what classroom projects are.

If your school has its own rules for online accounts, those come first. When in doubt, ask your data-protection lead before the lesson rather than after.

What can students make in one lesson?

More than you'd expect, because sculpting is pushing and pulling clay, not placing points. In a 50-minute period, a first-timer can usually:

  • start from a sphere, a head or another simple shape on the start screen,
  • block out a creature, a face or a stylised object with the Clay, Move and Smooth brushes,
  • switch on symmetry so both sides grow together,
  • add surface detail and a little colour.

For the first ten minutes, give everyone the same three brushes and one goal ("make the sphere into a pear, then give it a face"). Open-ended "sculpt anything" works better in the second lesson, once the controls feel familiar. Our first sculpt guide is a ready-made walkthrough you can hand out, and the docs explain every tool.

How do students hand in their work?

Several ways, all on the Free plan:

  • A share link. The studio publishes the sculpt as a 3D viewer link anyone can turn around in their browser, with no account needed to look. Students can paste it into your learning platform. Free accounts keep five links at a time.
  • Saved projects. Each account keeps five cloud projects of up to 150 MB, with autosave, so unfinished work is there next lesson.
  • A file on the computer. File ▸ Save local writes a .clay project file that opens again in the studio, handy where cloud storage is a concern.
  • STL or OBJ. Both export on Free, so finished pieces can go straight to the school's 3D printer. See browser sculpting for 3D printing for getting a print-ready mesh.
  • A timelapse. The studio can record the whole session as a video, which shows the process as well as the result. Free videos carry a small Re:Form mark.

What it is not good at, so you can plan around it

  • It needs a working connection to sign in and save to the cloud. Sculpting itself runs on the device, but a dead school network on the day means saving locally only.
  • Phones are too small. Tablets with WebGPU work; phones are not supported.
  • It's an alpha. Re:Form is in active development, and things change between versions. Try the lesson yourself on a student device the week before.
  • It's a sculpting tool, not a CAD tool. For precise, measured parts, a CAD package is the better fit; Re:Form is for organic shapes, characters and expressive forms.

Getting started

Make yourself a free account at reformsculpt.com/app, try the three-brush exercise above on the devices your class will use, and you'll know within ten minutes whether it fits your room. If something gets in the way, a blocked sign-in, a device that won't run it, or a feature you need for a course, tell us. Teachers' reports go straight to the people building it.