Sooner or later every sculpt needs texture that nobody wants to draw by hand: a thousand skin pores, a row of stitches, a field of scales. Brush alphas are how that gets done. They are also one of the most misnamed things in 3D, so it's worth being clear about what one is before loading a pack of 500.
What is a brush alpha in 3D sculpting?
A brush alpha is a grayscale image that shapes each dab of a sculpting brush. White areas apply the brush at full strength, black areas leave the surface untouched, and grays fall in between. ZBrush, Blender, Nomad Sculpt and Re:Form all support them, and they are the standard way to stamp pores, scales, stitches and cracks.
The name is a historical accident. In image editing, "alpha" means the transparency channel. In sculpting it means a height stencil: the picture isn't blended onto anything, it decides how hard the brush presses at each point inside its circle. A plain round brush already has an invisible alpha, a soft dot that's strong in the middle and fades at the rim. Loading an image swaps that dot for any shape you like.
That's why an alpha is a modifier, not a brush. The same crack image on a Draw brush raises a ridge in the shape of the crack; on a carving brush, or with the alpha inverted, it cuts the crack in. The brush decides what happens to the surface. The alpha decides where.
If the basic brushes themselves are still new, the guide to sculpting brushes covers what each one does before an alpha gets involved.
How an alpha turns gray into height
Three properties of the image decide how the stamp comes out.
The gray values are the depth. Pure white is the full Strength of the brush, pure black is nothing, and 50% gray is half. A smooth gradient from black to white becomes a smooth slope. A hard jump from black to white becomes a cliff. Most of the craft of making a good alpha is controlling those transitions.
Black is usually the floor. In the default setup of most tools, black means "don't touch" and everything brighter pushes outward. Some tools let you move that zero point. Nomad Sculpt's manual describes a mid value setting where, at 0.5, middle gray does nothing, black pushes the surface in and white pulls it out (as of November 2026). That lets one image raise and carve in the same dab, which suits things like a rivet with a groove around it.
The borders must fade to black. The alpha fills a square inside the brush circle. If the image is bright at its edges, the brush stamps the edges, and you get a faint rectangular plateau around every dab. Good alphas sit on a black field with a soft falloff all the way around.
Why does my alpha leave a square edge or stair-steps?
A square edge means the alpha image doesn't fade to black at its borders, so the brush stamps the picture's frame. Stair-steps mean the image has too few gray levels or the mesh has too few vertices. Maxon's ZBrush documentation notes that 8-bit images hold 256 gray levels, against over 65,000 in 16-bit.
Each cause has its own fix:
- Square plateau around the stamp. Darken the borders of the image, or blur it so the edge pixels fall to black. A vignette in any image editor does it.
- Terraced, contour-map slopes. The image has run out of gray levels. A long, gentle slope stretched over 256 steps shows every step. Use a 16-bit source when you have one, or soften the alpha with a blur setting so neighboring steps blend.
- Mushy detail that never sharpens. The mesh is too coarse. An alpha can only move vertices that exist, so a pore stamp on a low-resolution head produces vague dimples. Subdivide first. How many polygons a sculpt needs has working numbers for each stage.
- Detail that looks pasted on. Strength is too high. Texture reads best when it barely breaks the surface; drop the Strength and build with two or three passes.
The third one catches nearly everyone. If an alpha looks great in its thumbnail and terrible on the model, check the triangle count before blaming the image.
Stroke type decides what the alpha does
The same alpha behaves like four different tools depending on how the dabs are laid down. The names vary by app; the behaviors don't.
Drag (one stamp, placed by hand). Press, drag out to set the size and rotation, release. One clean copy of the image lands on the surface. This is the mode for anything that should appear once and in a specific place: a logo, a scar, a single large scale, an ornament on armor.
Dot (one stamp, placed by position). A single dab follows the cursor until you let go. Useful when the size is already right and you only need to aim.
Freehand with wide spacing. Dabs follow the stroke, and the spacing setting controls how far apart they land. Tight spacing smears the alpha into a continuous groove or ridge. Wide spacing lays it down as a row of separate stamps, which is how stitches, rivets, chain links and zipper teeth get made. Most tools rotate the image to follow the stroke direction, so the stitches turn with the seam.
Spray or scatter. Dabs are thrown around the cursor at random positions, and often random sizes. This is the mode for organic texture, where regularity is the enemy: pores, pebbles, warts, bark. A small alpha, a low Strength and a scribbling motion cover a cheek in seconds without a visible repeat.
Picking the stroke type first, then the alpha, saves a lot of confusion. A pore alpha on a freehand stroke with tight spacing produces a streak, and it's the stroke that's wrong, not the image.
How do alphas work in ZBrush, Blender and Nomad Sculpt?
ZBrush keeps alphas in a dedicated Alpha palette and works in 16-bit grayscale. Blender has no object called an alpha: a brush texture does the same job, with mapping modes such as Area Plane and Stencil. Nomad Sculpt sets the alpha in its Stroke menu, with tiling, rotation and a mid-value control. All as of November 2026.
| Where it lives | Notable controls | |
|---|---|---|
| ZBrush | Alpha palette | 16-bit alphas; flattened 16-bit grayscale PSD or TIFF recommended; depth can be grabbed from the canvas |
| Blender | Brush Texture panel | Mapping: View Plane, Area Plane, Tiled, 3D, Random, Stencil; Vector Displacement on the Draw brush |
| Nomad Sculpt | Stroke menu | Scaling, rotation with a screen lock, tiling, invert, mid value |
| Re:Form | Alpha slot in the Brush panel | Library plus import; Contrast, Blur, Sharpness, Invert; capture from the sculpt |
A few details from each vendor's documentation are worth knowing.
ZBrush is where the term comes from, and its handling is the most developed. Maxon's reference guide recommends flattened 16-bit grayscale files saved without compression, and says alphas can also be converted to stencils, textures or 3D meshes.
Blender treats the image as a texture that controls the brush's strength in Sculpt Mode. The mapping mode matters more than anything else: the Blender 5.3 manual calls Area Plane, which projects along the local surface normal, an ideal default for most brushes, while Stencil projects the image from the camera so you can position it on screen and paint through it. Blender's Vector Displacement option, which uses color channels to move geometry in three directions, is supported only on the Draw brush with Area Plane mapping.
Nomad Sculpt fits the texture inside the brush circle and rotates it to follow the stroke unless you lock it to the screen. One practical warning from its manual: the texture is never resized, so very large images can slow the brush down.
ZBrush and Blender are far more mature than Re:Form, and Nomad is the better choice on a tablet. Re:Form is our tool, so weigh the next section with that in mind.
How do you use alphas in Re:Form?
In Re:Form, click the Alpha slot in the Brush panel to open the alpha library, pick a starter shape or import your own image, then stroke. Contrast, Blur, Sharpness and Invert adjust the alpha without changing the stored file. Alphas are on the Free plan, and Re:Form is in beta as of November 2026.
The details, all from the current build (v0.9.1 Beta):
- The library. It opens with a starter set of the shapes that get used most: soft and hard dots, rings, squares, stripes, grids, noise, cracks, scales and more. Your own imports are kept alongside them for next time.
- Import. Any image works, including PNG, JPEG, WebP, TIFF and PSD.
- Adjustments. Contrast, Blur and Sharpness sit under the slot, and every alpha remembers its own settings. Reset adjustments returns it to the way it came in. Blur is the quick fix for the stair-stepping described above.
- Invert. One switch flips the alpha so a stamp that raised now carves.
- Capture. Turn part of your own sculpt toward the camera, frame it in the square, and save it as a new alpha at 512, 1024 or 2048 px. Depth makes a height alpha (nearest is white, farthest is black); Silhouette keeps the outline only.
- Stroke types. Freehand, Spray, Scatter, Curve, Line, Dot and Drag. Drag lays one stamp exactly as wide as the circle you drag out, a fix that landed in 0.9.1 along with alpha strokes keeping the same shape at any stroke speed.
- Saved brushes. A saved brush keeps its alpha and the alpha's adjustments, so a "stitches" brush is one click away next session.
Detail passes are a good use for sculpt layers: put the pores on their own layer and you can dial them back, or remove them, without touching the forms underneath.
One beta caveat. In a Re:Sync collaborative session, a stroke that uses an alpha shows on the other people's screens when the stroke ends, not while you draw it, because the image exists only in your studio.
Re:Form runs in desktop browsers with WebGPU, needs a free sign-in, and has nothing to install. You can open the studio and try the starter alphas on the default sphere, and the plans page lists what Free and Pro each include. The full walkthrough of the Brush panel is in the size, strength and falloff guide.
Making your own alpha
Downloaded packs are convenient, but the alphas you make fit your own work better, and there are only three ways to make one.
Paint it. Open any image editor, fill a square canvas with black, and paint in white with a soft brush. Keep the subject away from the borders. A 1024 px square is plenty for most stamps. Paint the shape as a height map, not as a picture: the brightest point is the highest point, so a dome is a radial gradient and a sharp ridge is a thin bright line with gray shoulders.
Derive it from a photo. A photo of concrete, leather or bark can become an alpha, with a caveat. A photo records light, not height, so shadows turn into pits and highlights into bumps whether or not that's true of the real surface. Convert to grayscale, raise the contrast, blur slightly, and vignette the edges to black. It works well for fine, noisy texture and badly for anything with clear form.
Capture it from a sculpt. This gives the cleanest result because the gray values are real depth. Sculpt the shape once on a flat surface, a single scale or a button or a wrinkle cluster, then grab its depth as an image. ZBrush does this by grabbing depth from the canvas, and Re:Form does it with Capture. The first scale takes ten minutes; the next four hundred take one stroke each.
Whatever the method, test on a dense sphere before using it on a real model. Stamp once with Drag at moderate Strength and look at the edges from a low angle. A plateau, a terrace or a seam shows up immediately there, and it's much easier to fix in the image than on a finished face.
When is an alpha the wrong tool?
An alpha is the wrong tool when the shape needs overhangs, when the whole surface needs texture at once, or when the underlying form isn't finished. A grayscale image can only push the surface straight in or out, so curled horns and ears need a vector displacement stamp, such as Re:Form's Mesh brush or Blender's Vector Displacement option.
Overhangs. A height map has one value per pixel, so it can't describe a shape that folds back over itself. Vector displacement stores a direction as well as a distance. Re:Form's Mesh brush ships with five stamps (Ear, Horn, Bolt, Scale and Spike) and lets you capture your own; the Mesh brush guide has the steps.
Whole-surface texture. If every part of a model needs the same grain, brushing it on by hand is slow and uneven. A procedural or tiled pass does it in one step. In Re:Form that's Tools ▸ Surface noise, which can tile any alpha from the library across the active layer, with per-tile turn, blend, size and shift settings to hide the repeat.
Unfinished forms. This is the common mistake, and no tool fixes it. Pores on a head with the wrong skull shape make a detailed wrong head. Alphas belong at the end, after the primary and secondary forms hold up from every angle. The face sculpting walkthrough puts the texture pass where it belongs, which is last.
FAQ
Where can I get free brush alphas?
Start with what's built in: ZBrush, Blender, Nomad Sculpt and Re:Form all ship starter alphas or textures, and Re:Form's library is available on the Free plan. Beyond that, any grayscale image is an alpha, so you can paint or capture your own. If you download a pack, read its license first, especially for commercial work.
What resolution should a brush alpha be?
For most stamps, 512 to 2048 px square is enough, and Re:Form's Capture saves at exactly those three sizes: 512, 1024 or 2048 px. Going larger rarely helps, because the mesh under the brush limits the detail more than the image does. Nomad Sculpt's manual also warns that very large textures can slow the brush.
Can I use ZBrush alphas in other sculpting apps?
Usually, yes. An alpha is an ordinary grayscale image, so a file saved as PSD, TIFF or PNG loads anywhere that accepts the format. Re:Form imports PNG, JPEG, WebP, TIFF and PSD, and Blender loads images as brush textures. Check the license of any pack you bought, since some restrict use to one application or to non-commercial work.