Re:Form 0.9.1 Beta is out. The headline is Re:Sync, for collaborative sculpting: you can now open a session on a sculpt, give its code to someone, and sculpt the same model together at the same time, each in your own browser. Pro now goes up to 100 million triangles. Saving to your account is fixed, after a fault that made saves fail for about a week. And a long list of speed-ups lands across Clip, Remesh, picking and exports, with FXAA anti-aliasing on by default.

What version is Re:Form on now?

Re:Form is on v0.9.1 Beta as of November 10, 2026. To update, reload the page: there is nothing to install, and your saved projects and autosaves carry over. If you haven't tried Re:Form yet, open the studio in your browser.

The Terms of Use and the Privacy Policy have a new version with this release, because Re:Sync is new and they describe what it does. The first time you sign in after updating you'll be asked to accept them.

What is Re:Sync?

Re:Sync is for collaborative sculpting: several people sculpt the same model at the same time, live. One person opens a session on a sculpt and becomes its host; everyone else joins with the host's code. Everyone works on the same mesh at once, anywhere on it, and sees the others' strokes grow as they are drawn. Each person's brush shows on the others' screens as a ring in their own colour, with their name.

To start one, open a sculpt, choose File ▸ Re:Sync… and press Start a session. The window shows a ten-character room code; press Copy and send it to the people you want. To join, open File ▸ Re:Sync…, paste the code under Join with a code and press Join. Both of you need to be signed in.

A few things make it work smoothly:

  • Undo takes back only your own strokes. Someone else's later work in the same place is kept as far as it can be.
  • The host owns the shape. Subdivide, Remesh, Clip, Decimate and changes to the layers are the host's alone, so nobody pulls the mesh out from under anyone else.
  • Chat and voice. Type in the session's chat, or switch Voice on to talk. Voice goes straight between the people whose Voice is on and is never recorded or stored.
  • Host controls. The host can set one person, or everyone, to Watch only, mute someone for everyone, or remove them.
  • Everyone keeps the sculpt. When the session ends, each person has the sculpt open as an unsaved sculpt of their own, to save or throw away.

How many people can join a Re:Sync session?

It depends on the host's plan. A Free host can sculpt with one guest for 30 minutes at a time. A Pro host can have up to seven guests, eight people in all, with no time limit. Guests only need an account, on any plan.

It's also a natural fit for teaching: a teacher hosts, the students join with the code, and the teacher can switch everyone to Watch only while they demonstrate. The full walkthrough is in the Re:Sync guide.

Re:Sync is new, so a few things to know. Strokes that use something only your own studio has, such as a brush alpha or a paint image, show on the others' screens when the stroke ends rather than while you draw it. A very heavy sculpt (over 96 MB) can't be sent to someone joining; stepping down a subdivision level makes it lighter.

Pro now sculpts up to 100 million triangles

Pro's triangle budget goes from 80 million to 100 million, eight times the Free plan's 12.5 million. That means another subdivision level on dense models, bigger merges, and bigger arrays before you hit the ceiling. For the smoothest sculpting on an 8 GB graphics card, 50 million triangles is still a comfortable working size; the extra room is there when a project needs it.

Saving to your account works again

From the 0.9.0 release on October 31 until November 9, saving a project to your account could fail with "Could not check your plan. Try again in a moment." The cause was on our side: the check that reads your plan before a save asked our payment service a question in a form it refuses, so the check failed and the save stopped. A second, smaller fault refused saves in a studio that had been open for more than an hour.

Both are fixed, and saves are landing again. If a save of yours failed in that window, we're sorry. Your work stayed in the browser's autosave and in anything you saved to your computer, but it didn't reach your account. Open the studio and save once more. To catch anything like this the same day in future, we now check every morning that each save attempt actually reached storage.

Clip is up to three times faster, with even caps

Every Clip now fills its cut face with an even grid of well-shaped triangles, instead of splitting the cap again and again. The cut looks cleaner, with the same density on both sides of the centre line when Symmetry is on and no paper-thin triangles, and it's much quicker. At 3.1 million triangles:

Clip Before Now
Clip Line 17.4 s 6.7 s
Clip Circle, off the centre line 15.5 s 4.3 s
A masked strip over the model 81 s 40 s

A Clip that runs beside a mask or a hidden Mesh Set also closes the opening with a smooth patch that follows the surface, where it used to leave a flat fan of thin spokes.

Remesh makes far fewer poles

The small dimples that showed on a remeshed model after Subdivide came from three-sided points in the quad grid, which subdivision shrinks into tight spots. Remesh now cancels those points in pairs and squares up the quads around every spot it changes, so a remesh comes out with four to five times fewer of them, and the dimples after Subdivide go with them. The clean-up costs some time at high resolutions, so the Cleaning up stage on the Remesh card now fills as it works, and a round of speed-ups brought it down (at Resolution 512 on a 1.3-million-triangle sphere, 43 s to about 30 s).

FXAA anti-aliasing, on by default

Edit ▸ Preferences ▸ Graphics ▸ Anti-aliasing has a new middle choice, FXAA (light): one quick pass that smooths the stair-steps along the model's edges. On a test edge it straightens them as well as 4× MSAA does, and it holds 60 frames per second in Firefox at 12 and 50 million triangles. It's the new default; if you'd chosen Off or 4× MSAA before, your choice is kept.

Faster work on big sculpts

  • The brush cursor comes back at once after switching layers or undoing a Remesh, Clip or Weld, instead of after a two-second rebuild at 3.1 million triangles.
  • Picking is faster: the data behind the brush cursor builds in a third of the time and answers each pick about 70 times faster.
  • Weld answers at once when there is nothing to merge (3.4 s to 0.06 s), and OBJ export writes the same file in a third of the time.
  • FBX export is faster too, and a flat-shaded FBX is now marked flat, so other programs show it the way you saw it.
  • Close holes no longer puts a folded patch into the mesh, and closes a hole that wraps round the model in about half the time.

Brushes and tools

  • Alphas and Noise keep their shape at any speed. On a big sculpt, a fast stroke with an alpha, or with the Noise brush, used to come out different from a slow one. Now the shape is the same however fast you move.
  • Surface noise tiles. For an image pattern, Tile turn, Tile blend, Tile size and Tile shift turn, fade, resize and slide each tile by its own random amount, so the repeat and the seams stop showing.
  • Drag stamps match the circle. The Drag stroke type now lays its stamp exactly as wide as the circle you drag out, where it used to land at about half of it. The Mesh brush, which always stamps by dragging, follows the same circle.
  • Cleaner Carve grooves. A Carve brush that is small next to the mesh's triangles no longer leaves a serrated, triangulated pattern along its walls, which showed most after a Remesh.

Everything else

  • Every language complete again. About two hundred labels and messages added since the last translation round now show in all ten languages.
  • A friendlier sign-in step. After a Terms update, the step that saves your acceptance now just says "Signing you in…".
  • No empty project count. The start screen no longer shows "0/5 projects" before you've saved anything.

That's 0.9.1. If you try Re:Sync with someone, or something doesn't behave the way you expect, tell us: every report reaches the people building it.