Re:Sync is for collaborative sculpting: several people sculpt the same sculpt at the same time, each in their own browser. Everyone works on the same mesh, anywhere on it, and sees the others' strokes grow as they are drawn. Open it with File ▸ Re:Sync….

One person is the host: the session runs on their sculpt. Everyone else joins with the host's room code.

Before you start

  • You need to be signed in, to start a session and to join one. Without an account the window says so and Start and Join stay greyed.
  • Re:Sync runs on the GPU engine. If the studio was switched off it, View ▸ Engine switches back.
  • Finish what you are doing first: wait for an operation to end, leave the Blockout or Reflow tool, and drag Timeline back to Now.
  • Your name at the top of the window is what the others see beside your cursor, in the people list and in the chat (up to 24 characters).

Start a session

  1. Open the sculpt you want to work on together.
  2. Open File ▸ Re:Sync… and press Start a session.
  3. The window shows the Room code: ten letters and digits. Press Copy and send it to the people you want in the session.

You are the host. Your sculpt is the one everyone works on, and only you change its shape or its layers.

Join a session

  1. Open File ▸ Re:Sync….
  2. Type or paste the host's code under Join with a code and press Join.

The host's sculpt replaces what is open in your studio. If you have work open, Re:Form asks first: Save, then join saves it to your account before you join, Join without saving goes straight in. The host's sculpt then arrives, and you can sculpt as soon as it has.

If the code is wrong, the session has ended or it is full, the window says which.

Sculpting together

  • Everyone sculpts at once, the same spot included. Each person's cursor shows on the others' screens as a ring in their own colour, with their name, and the ring follows their brush while they stroke.
  • Undo and Redo take back only your own strokes. Other people's later strokes in the same place are kept as far as they can be.
  • The host's copy is the one that counts. Every few seconds the studios compare their copies with the host's, and anything that has drifted is put right from the host's.
  • A few strokes cannot be drawn live on the others' screens, because they use something only your studio has, such as a brush alpha or a paint image. They show for the others when the stroke ends.

Some things change the mesh's shape or which layers there are, and those are the host's alone: Subdivide, Remesh, Clip, Decimate and the like, adding or removing layers, and Live Topology. A guest who tries one is told so; a guest with Live Topology switched on is asked to switch it off to sculpt. While the host's change reaches everyone, every brush rests for a moment (Updating…), then everyone carries on.

While a session is open:

  • Timeline rests. The sculpt is everyone's, and the Timeline would show only your own steps. It starts afresh when the session ends.
  • A guest cannot open another sculpt: leave the session first. When the host opens one, it goes to everyone.

The Re:Sync window

During a session the window shows the room code, the people in the session and the chat. Close puts the window away and the session carries on; the Re:Sync chip in the status bar shows how many people are in it and brings the window back.

People

Each person has a row with their colour, their name, and a line saying whether they are the Host, a Sculptor or Watching, and whether they are sculpting now.

  • Voice (on your own row) talks with the others. Your browser asks for the microphone; your voice goes straight to the others whose Voice is on, and is never recorded or stored. While someone speaks, their dot in the list wears a ring, and so does their cursor on the sculpt. If you hear nothing, click anywhere in the studio: the browser holds the others' voices back until you do.
  • Follow locks your view to that person's. Moving your own view stops it.
  • Mute stops you hearing that person. Only you are affected, and they are not told.
  • ⋯ ▸ Report this person… opens Help ▸ Report a problem with the session's code and the person's name written in. Nothing is sent until you press Send there.

Chat

Type a message under Chat and press Enter. Everyone in the session sees it, with the name in its writer's colour. A message can be up to 500 characters.

Leaving

A guest presses Leave. The sculpt stays open in your studio as an unsaved sculpt of your own: save it if you want to keep it.

The host's button reads End session, and it ends the session for everyone. Each person keeps the sculpt as it is, as an unsaved sculpt of their own. Closing the host's tab ends the session too.

Host controls

The host has a few more buttons:

  • Watch only on a person's row: they can still see everything, but cannot sculpt until you press Let sculpt.
  • Everyone: Watch only, beside People: everyone else watches, and people who join come in watching. You can still let one person sculpt, and Everyone: Let sculpt lets everyone sculpt again.
  • Remove takes a person out of the session. They cannot come back into it.
  • ⋯ ▸ Mute for everyone silences a person for everyone: nobody hears them until you press Unmute for everyone. They are told, and their row says muted by the host.

Plans and limits

Only the host's plan counts. Joining needs an account and nothing more.

Free host Pro host
People in a session, the host included 2 (you and one guest) 8
How long a session lasts 30 minutes No limit
  • On a Free session the window counts down the minutes left. At 30 minutes the session ends for everyone, and everyone keeps the sculpt as it is.
  • When someone tries to join a full session they are turned away, and the host is told.
  • The whole sculpt is sent to each person who joins, so it has to come to 96 MB or less. A heavier sculpt cannot be sent, and the person joining is told why; stepping down a subdivision level makes it lighter.
  • A session nobody has been heard from for over a day is over and cannot be joined. Start a new one.

What happens to the sculpt

The session works on the host's sculpt. Nothing is saved to anyone's account by Re:Sync itself: when the session ends, each person has the sculpt open as an unsaved sculpt of their own. Save it with File ▸ Save, or keep a copy on your computer with File ▸ Save local… (see Saving, opening & autosave).