Every sculpting program has a button that makes the mesh four times denser, and most of them have a second button that takes you back. The second one is what makes subdivision a workflow and not only a way to add triangles. This post covers what levels are, how detail survives a trip down and back up, and how four tools implement them. Re:Form is our tool and one of the four, so weigh that section accordingly.
What are subdivision levels in 3D sculpting?
Subdivision levels are stored versions of one sculpt at different densities. Each level up splits every face into four, so the count quadruples, and the program keeps the coarser levels so you can return to them. ZBrush, Blender, Nomad Sculpt and Re:Form all work this way, and the technique is called multiresolution sculpting.
A sculpting brush can only move vertices that exist. A coarse mesh has enough of them for a skull shape and nowhere near enough for an eyelid, so at some point you need more. Subdividing gives you more everywhere at once: each quad becomes four smaller quads, and the surface is smoothed as it refines, so the new level looks like a rounder version of the old one.
On its own that is only a density increase. The part that matters is that the program remembers the level you came from. You are not replacing a coarse mesh with a fine one. You are building a stack, with the blockout at the bottom and the pores at the top, and you can stand on any rung of it.
How the triangle count grows
Each level multiplies the count by four, which is gentle at first and then abrupt. Re:Form's default sphere starts at 49,152 triangles, and its subdivision guide lists the ladder from there:
| Level | Triangles | Good for |
|---|---|---|
| 0 (base) | 49,152 | Silhouette and proportion |
| 1 | about 197 thousand | Large masses |
| 2 | about 786 thousand | Secondary forms: muscle groups, facial planes, major folds |
| 3 | about 3.1 million | Wrinkles, sharper creases |
| 4 | about 12.6 million | Fine surface detail |
| 5 | about 50.3 million | Pore-level detail across a whole figure |
Two things follow from the table. Going from level 2 to level 4 for a sharper lid crease means sixteen times the triangles on the back of the head as well, where nothing needed them. And the last level you add always costs more than every level before it put together. The polygon budget guide has more of this arithmetic, including what a printer or a game engine can use.
How does multiresolution sculpting keep detail when you change levels?
Multiresolution sculpting stores each finer level as detail relative to the surface of the level below it, not as positions in space. When you step down and reshape the coarse mesh, the finer levels are rebuilt on the new shape. In ZBrush, Blender, Nomad Sculpt and Re:Form, wrinkles sculpted at level 4 follow an arm you bend at level 1.
Maxon's ZBrush documentation explains it with a landscape: sculpt bumpy detail onto rolling hills at a high level, drop to a low level and smooth the hills, and when you come back up the fine bumpiness is still there, because changes are "propagated across all levels" (Maxon ZBrush help, as of November 2026).
This is the reason to keep levels at all. Proportion problems show up late. You notice the jaw is too narrow after the skin texture is on, and at 12 million triangles a Grab stroke big enough to fix it drags detail into smears. With levels you step down to a mesh coarse enough to move cleanly, fix the jaw, and step back up. The texture comes with it.
It also works the other way round. A broad change made at a low level stays smooth, because there are few vertices to leave lumps between. Many of the bumps described in why a sculpt looks lumpy come from making big changes on a dense mesh.
Subdivision levels in four sculpting tools
The idea is the same everywhere. The names and the escape hatches differ.
| ZBrush | Blender | Nomad Sculpt | Re:Form | |
|---|---|---|---|---|
| Where it lives | Tool > Geometry | Multiresolution modifier | Topology menu, Multiresolution | Topology section, shortcut bar |
| Go up | Divide | Subdivide | Subdivide | Subdivide ↑ |
| Move between levels | SDiv slider, Lower Res, Higher Res | Sculpt level, Alt-1 and Alt-2 | Levels slider | Subdivide ↓ and Subdivide ↑ |
| Rebuild a lower level | Reconstruct Subdiv | Unsubdivide, Rebuild Subdivisions | Reverse | Not available |
| Drop levels | Del Lower, Del Higher | Delete Higher | Delete lower, Delete higher | Delete lower levels, Delete higher levels |
All competitor details below are from each tool's own documentation as of November 2026.
ZBrush. The Divide button in the Geometry sub-palette "doubles the horizontal and vertical resolution" of the model, and the SDiv slider picks the level, with 1 as the lowest. Reconstruct Subdiv "attempts to construct a lower-resolution mesh level from the current lowest level", which is how artists recover levels on a mesh that arrived without them. Freeze SubDivision Levels preserves higher-level detail when using DynaMesh. ZBrush's level workflow is the reference the other tools are measured against.
Blender. Levels live in the Multiresolution modifier (Blender 5.3 manual). It has separate level settings for the viewport, Sculpt Mode and rendering, and in Sculpt Mode Alt-1 and Alt-2 step down and up. Subdivide creates a smooth level using Catmull-Clark; Simple and Linear create levels with less or no smoothing. Sculpt Base Mesh lets you deform the base while previewing the higher level, and Unsubdivide rebuilds a lower level. Rebuild Subdivisions generates a low base from an existing sculpt, and is only available before any level has been created through the modifier.
Nomad Sculpt. The Multiresolution section of the Topology menu has a levels slider, a Subdivide button that multiplies the polygon count by four, and Reverse, which tries to create a level below the lowest one. Nomad's manual notes that Reverse generally works only if the object was originally created with subdivision, and warns that tools which alter topology lose the other resolutions. Its Voxel Remesher has a Build multiresolution option that creates lower levels for the remeshed result.
ZBrush and Blender are far more mature than Re:Form, and Nomad is the better choice on a tablet. If you need to rebuild lower levels on a mesh that has none, those three can attempt it and Re:Form cannot.
How do subdivision levels work in Re:Form?
In Re:Form, Subdivide ↑ splits every quad into four and Subdivide ↓ steps back down, with the finer levels kept. They sit in the Topology section, on the shortcut bar, and on Ctrl+D and Shift+D. Free sculpts up to 12.5 million triangles and Pro up to 100 million. Re:Form is in beta as of November 2026.
The details, from the subdivision guide:
- Level readout. The Level readout shows where you are in the stack. Step down as far as the base, change the big forms, step back up, and every finer level returns with its detail following the new shape.
- Paint and masks come along. A painted mask rides through every subdivide, and a broad color laid at a low level shows through at higher levels without wiping fine paint.
- Stored levels. A readout shows the memory the kept levels take. That is system memory, not graphics memory. Delete higher levels frees it. Delete lower levels makes the current level the new base, asks first, and cannot be undone.
- Crease edges. Subdivision rounds everything, which suits a creature and not a box. Mark by angle marks the edges that should stay sharp, and Subdivide ↑ keeps them as crisp lines level after level. The hard surface sculpting guide covers where that matters.
- Budget warning. The triangle count in the viewport turns amber at 60% of your plan's limit, which is the point where the next Subdivide would pass it, and red at 90%.
The Free plan's 12.5 million triangles cover the whole project, every layer added together, and the guide counts that as four Subdivides of a new sphere. Pro's ceiling is 100 million. The default sphere's own ladder tops out at about 50 million, and above that the app asks you to confirm, because how well it runs depends on your graphics card. The mesh is kept on the GPU so that strokes stay interactive at high counts; that is the engine's design goal, not a benchmark promise for every machine.
Re:Form runs in desktop browsers with WebGPU, needs a free sign-in, and has nothing to install. You can open the studio and press Ctrl+D on the default sphere to watch the count climb, and the plans page lists what Free and Pro each include.
When should you go up a level?
Go up a subdivision level when strokes start to look faceted, meaning the mesh can no longer hold the shape the brush is asking for, and not before. Working one level too high slows every tool and invites small detail before the large forms are settled. Most sculpts need the base, one or two middle levels, and a detail level.
The usual ladder has three stages.
- Base level: silhouette and proportion. Grab, Clay and the Move tool. If the figure does not read as a black shape against a white background, more triangles will not help.
- One or two levels up: secondary forms. Muscle groups, the planes of the face, major folds. How to sculpt a head walks through this stage on a real subject.
- High levels: surface. Pores, cracks, stitching, cloth weave. By now the form underneath should be finished.
Two habits make this work. Stay on a level until you have used it up: if you can still improve the sculpt where you are, going up only hides the problems under smoother shading. And go back down without hesitation. A late proportion fix belongs two or three levels below where you are working, even on the last day.
The limits of subdivision
Subdivision refines the grid you already have and never rearranges it. Three consequences are worth knowing before you rely on levels.
Stretched triangles stay stretched. After a long Grab pull, the faces along the pull are long and thin. Subdividing turns each into four long, thin faces. The fix is a remesh, which rebuilds the surface at an even density. Retopology vs remeshing covers the options.
New topology ends the stack. Levels depend on a fixed base mesh, so anything that rewrites the mesh breaks the link between them. In Re:Form, Remesh, Weld, a Clip cut, merges and splits ask before running when kept levels sit above the current one. Nomad's manual gives the same warning for its topology tools. The usual order is to remesh freely while finding the shape and start building levels once the shape is settled.
Dynamic topology and levels do not mix. Dynamic topology adds triangles only under the brush, which makes it good for blockouts and wrong for a level stack. Re:Form's Live Topology needs a single level, and Subdivide switches Live off before it runs. Dynamic topology explained compares the three approaches.
A fourth point is about the base itself. Subdivision smooths best on an even quad mesh with few irregular points, the places where three or five quads meet. In Re:Form, a Remesh result subdivides cleanly, and Reflow produces a cleaner base with far fewer of those points. If Reflow loses detail you had already sculpted, subdivide the result and press Reproject to bring it back.
FAQ
How many subdivision levels do you need?
Most sculpts need three to five levels above a coarse base, and the right number depends on the smallest feature you want to hold. Each level quadruples the count, so a 49,152-triangle sphere reaches about 12.6 million at level 4. Stop when the detail holds at the distance the piece will be viewed or printed from.
Can you get lower subdivision levels back on a mesh that has none?
Sometimes. ZBrush's Reconstruct Subdiv, Blender's Unsubdivide and Rebuild Subdivisions, and Nomad Sculpt's Reverse each attempt to build a lower level from the current one, and they work best on a mesh that was originally made by subdividing. Re:Form does not have a rebuild option as of November 2026, so keep the levels you need.
Do subdivision levels use more memory?
Yes. Every kept level is stored, and the top level dominates because it is four times the size of the one below. Re:Form shows the cost in its Stored levels readout, held in system memory, and Delete higher levels frees it. Blender's Multiresolution modifier can save displacements to an external .btx file with Save External.